Mechanical parts
Windmill Rotor (threaded-in collet, glued blades)
- Bounding box
- 156.8 × 179.3 × 57.2 mm
- Engine
- Precision B-rep
- Parameters
- 40
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
All-printed windmill rotor with three separate hardware-free parts: hub with a threaded socket, a replaceable collet that screws into the hub, and a collet nut; plus glued replaceable blades
Parameters
| Name | Value | Range |
|---|---|---|
| Rotor diameter | 200 mm | 100 – 400 |
| Number of blades | 3 | 2 – 6 |
| Blade chord at root | 24 mm | 14 – 40 |
| Blade chord at tip | 12 mm | 8 – 30 |
| Blade thickness at root | 4 mm | 2 – 6 |
| Blade thickness at tip | 1.6 mm | 1.2 – 4 |
| Camber (fraction of chord) | 0.06 | 0 – 0.1 |
| Design tip-speed ratio | 3 | 1.5 – 6 |
| Design angle of attack | 8 deg | 2 – 14 |
| Maximum pitch at root | 36 deg | 20 – 60 |
| Round neck length outside hub | 5 mm | 3 – 10 |
| Root peg diameter | 7 mm | 5 – 9 |
| Socket clearance on peg (diametral, glue gap) | 0.3 mm | 0.1 – 0.6 |
| Socket inner end distance from axis | 4 mm | 2 – 8 |
| Key flat depth on peg (sets blade angle) | 0.8 mm | 0.4 – 1.5 |
| Extra gap under key flat (air and glue channel) | 0.4 mm | 0.1 – 0.8 |
| Glue grooves on peg | 3 | 0 – 3 |
| Glue groove depth | 0.6 mm | 0.3 – 1 |
| Glue groove width | 1.2 mm | 0.8 – 2.5 |
| Glue well (socket mouth chamfer depth) | 2 mm | 0.5 – 3 |
| Hub body outer diameter | 28 mm | 24 – 40 |
| Hub body length above the thread zone (blade sockets) | 16 mm | 12 – 20 |
| Spinner nose height | 12 mm | 6 – 24 |
| Bore for 8 mm shaft | 8.2 mm | 8 – 8.6 |
| Optional flat in bore (0 = round bore; file a matching flat on the shaft) | 0 mm | 0 – 1.2 |
| Tapered collet length | 14 mm | 10 – 20 |
| Collet core radius at the tip | 6.2 mm | 5.5 – 8 |
| Collet taper angle (the clamping wedge) | 6 deg | 3 – 10 |
| Slit width between collet fingers | 1.2 mm | 0.8 – 2 |
| Collet flange outer diameter (grip) | 24 mm | 20 – 28 |
| Collet flange thickness | 3 mm | 2 – 6 |
| Stud (hub thread) core radius | 7 mm | 6 – 9 |
| Stud length screwed into hub | 9 mm | 6 – 14 |
| Thread pitch (nut and stud) | 2.5 mm | 2 – 4 |
| Thread depth | 1 mm | 0.6 – 1.6 |
| Thread clearance (per side) | 0.2 mm | 0.1 – 0.4 |
| Collet nut outer diameter | 22 mm | 20 – 28 |
| Collet nut height | 9 mm | 7 – 12 |
| Nut start height above collet tip (loose position) | 0.5 mm | 0 – 2 |
| Gap between collet tip and cover boss (reference shaft) | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.