Mechanical parts
Railway Ratchet Compensation Wheel Assembly (n=4)
- Bounding box
- 565.8 × 565.8 × 15.2 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 25, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of the railway ratchet compensation wheel from Qi et al. (2024), n=4 reconstructed model. Match the supplied reference image: one large toothed ratchet wheel, four symmetric curved structural members at 90°, central hub/shaft region, and small compensation wheels with rope grooves. Critical dimensions: • Large wheel OD = Ø566 mm • Large wheel reconstructed thickness = 15 mm • Small wheel OD = Ø180 mm • Small wheel thickness = 13 mm • n = 4, four-fold symmetry • Rope groove radius = R5.5 mm • Groove angle = 120° • Rope diameter ≈ Ø9.5 mm • Minimum fillet = R2 mm • Transmission ratio = 1:3 • Material = ZL114A aluminium alloy Preserve the central hole and rope grooves as functional/non-design surfaces. Use smooth, curved force-transmission members rather than simple rectangular spokes. Reproduce the toothed outer ratchet profile and overall architecture shown in the supplied paper/reference image. Keep any dimension not specified above as an editable parameter; do not invent source dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Large Wheel OD | 566 mm | 300 – 900 |
| Large Wheel Thickness | 15 mm | 5 – 40 |
| Ratchet Tooth Count | 60 teeth | 12 – 120 |
| Ratchet Tooth Depth | 10 mm | 2 – 40 |
| Tooth Rim Band Width | 40 mm | 10 – 120 |
| Large Wheel Hub OD | 110 mm | 40 – 300 |
| Central Bore (Functional Surface) | 45 mm | 10 – 150 |
| Curved Arm Width | 36 mm | 10 – 120 |
| Curved Arm Sweep Angle | 15 deg | 0 – 45 |
| Small Wheel OD | 180 mm | 60 – 300 |
| Small Wheel Thickness | 13 mm | 4 – 40 |
| Small Wheel Bore | 30 mm | 6 – 90 |
| Small Wheel Mount Radius | 150 mm | 60 – 260 |
| Rope Groove Radius | 5.5 mm | 1 – 15 |
| Rope Groove Included Angle | 120 deg | 60 – 170 |
| Rope Groove Depth | 2 mm | 0.5 – 6 |
| Minimum Fillet Radius | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.