Every model here started as a sentence
Real parts generated from plain text prompts. Each one shows the exact prompt and parameters that produced it, and every file is free to download.
14170 models matchClear filters
Page 6 of 591
Matching models
Reference Cylinder (Parametric)
what type of files can i upload you can edut
Wayfarer Sunglasses Frame
kannst du mir bitte einen sonnenbrille wayfarer Ray Ban in einem Step erstellen
Drone Frame with Removable Plates
This Model is vertically integrated but I want two separate pieces, one above and one below.
Pavilion with Solar Roof
Modify the existing structural model to change its material colors and surface layers. Render the ten 6x6 vertical columns and all horizontal 2x12 header support rails in a natural
Triangular Plate with Energy Pocket
make it look like this
T-Bracket with Vertical Blade and Through-Hole
Please make sure that the 20.5mm hole cuts completely through the entire 10mm thickness of the vertical blade (extruded cut / all the way through).
Brick Kiln Chimney
design Chimney for brick Kiln
AC Hose Adapter
Ac hose adapter that will fit on a 200mm by 200mm print bed
PIN 针玻璃检漏封堵工装(盲帽 + 端面 O 型圈槽)
请重新设计一个用于馈通 PIN 针玻璃检漏的金属封堵工装,并输出可参数化编辑的 CAD 模型(优先 STEP,同时保留特征历史和参数表)。这是一个单件小批 CNC 加工件,结构为“盲孔圆筒帽”,直接扣在单个 PIN 针上,开口端用常见 O 型圈对 PIN 针玻璃外围的金属外壳平面做端面密封,从而把该 PIN 针的玻璃区域封堵隔离。注意:O 型圈必须完全压在玻
Desk-Clamp Phone Stand with Ball Joint and Spring Clip
Keep the C-clamp base, vertical post, elbow cylinder, and horizontal arm exactly as they are, and add two mechanical features at the front end of the horizontal arm (at X=-60mm, Y=
RIFA Competition Robot Assembly
Design a complete 3D CAD model of a compact autonomous robotics competition robot for RIFA. Maximum size: 300×300×300 mm. Target size: 280×280×270 mm for inspection clearance. Th
DHT11 Temperature & Humidity Sensor
build dht11 sensor
Steyr LP50 Match Grip (Right, M)
can you make me aright htanded match grip for the steyr lp 50 size M
FTC Dual-Stage Shooter Hood Assembly
Create a parametric, 3D-printable CAD model for a custom dual-stage robotics shooter hood designed for the FIRST Tech Challenge (FTC). The hood must handle two different sizes of g
Two Stage Preheater Building
pls show the 2 stage preheater building
Firefighting Quadcopter Drone – Exploded Assembly
Create a fully parametric 3D CAD assembly of a Firefighting Quadcopter Drone with a 10-liter rectangular water tank. Include a carbon fiber X-frame (1200 mm motor-to-motor), four b
Rectangular Solar Thermal Evaporation Chamber
Create a rectangular solar thermal evaporation chamber, 1200 mm long, 800 mm wide and 500 mm high, with one 50 mm water inlet, one 50 mm vapor outlet on top, and one 40 mm brine ou
Hexacopter Airframe Frame
| Parameter | Conceptual target | |---|---:| | Configuration | Hexacopter | | Overall diameter | ~1.2–1.5 m | | Propellers | 6 | | Landing gear | 4-leg or 6-leg | | Payload | ~2–4
Precision Watch Movement with Bearings
now make everything have good tolerances and bearings
Hollow Cone
Zeichne einen Konus, 50mm hoch. Unten Durchmesser 50mm, oben Durchmesser 4,42mm. Dann entferne innen bis auf Wandstärke 1mm
C-Washer 30/20 x 1.5
С-образная шайба, внешний диаметр 30мм, внутренний 20мм, толщина 1.5мм
Coprifavo legno Dadant-Blatt 10 favi
Modella esclusivamente il COPRIFAVO IN LEGNO del progetto p.Arnia. Non modellare nastro, rulli, raschiatori, serbatoio, motore, supporti o altri componenti del sistema. STANDARD:
Slim LED Driver Enclosure
Bu parçanın 3 boyutlu modellemesi için toplam 360 mm uzunluk (montaj kulakları dahil), 350 mm delik eksenleri arası mesafe, 30 mm genişlik ve 21 mm yükseklik ölçüleri esas alınmalı
Injection Molded Enclosure
Create a technical injection molded plastic enclosure. Dimensions: 60 x 42 x 10 mm Material: PA66 GF30 Wall thickness: 2.5 mm Draft: 1 degree Features: - Four corner mounting
Showing 24 of 14170 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
