Loading the interactive model…
Interactive 3D model of Precision Watch Movement with BearingsMechanical parts
Precision Watch Movement with Bearings
23 views
- Bounding box
- 38.8 × 28.0 × 7.0 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
now make everything have good tolerances and bearings
Parameters
| Name | Value | Range |
|---|---|---|
| Mainplate Diameter | 28 mm | 10 – 40 |
| Mainplate Thickness | 2 mm | 0.5 – 5 |
| Jewel Hole Diameter | 0.8 mm | 0.3 – 2 |
| Gear Module | 0.5 mm | 0.2 – 1 |
| Center Gear Teeth | 30 | 10 – 60 |
| Third Gear Teeth | 20 | 8 – 40 |
| Fourth Gear Teeth | 15 | 6 – 30 |
| Gear Stack Thickness | 1.5 mm | 0.5 – 4 |
| Escapement Diameter | 6 mm | 3 – 12 |
| Escapement Teeth | 15 | 8 – 30 |
| Escapement Thickness | 0.6 mm | 0.2 – 2 |
| Pallet Length | 3 mm | 1.5 – 6 |
| Pallet Width | 1.2 mm | 0.5 – 3 |
| Pallet Thickness | 0.4 mm | 0.2 – 1 |
| Balance Wheel Diameter | 12 mm | 5 – 20 |
| Balance Wheel Thickness | 0.8 mm | 0.3 – 2 |
| Balance Rim Width | 1.5 mm | 0.5 – 3 |
| Dial Diameter | 26 mm | 15 – 35 |
| Dial Thickness | 0.6 mm | 0.2 – 1.5 |
| Dial Center Hole | 2 mm | 0.5 – 5 |
| Hour Hand Length | 10 mm | 4 – 15 |
| Hour Hand Base Width | 2 mm | 0.5 – 4 |
| Hour Hand Thickness | 0.4 mm | 0.1 – 1 |
| Hour Hand Angle | 45 deg | 0 – 360 |
| Minute Hand Length | 12 mm | 6 – 18 |
| Minute Hand Base Width | 1.8 mm | 0.5 – 3.5 |
| Minute Hand Thickness | 0.35 mm | 0.1 – 0.8 |
| Minute Hand Angle | 10 deg | 0 – 360 |
| Second Hand Length | 14 mm | 6 – 20 |
| Second Hand Width | 0.6 mm | 0.2 – 1.5 |
| Second Hand Thickness | 0.3 mm | 0.05 – 0.6 |
| Second Hand Angle | 180 deg | 0 – 360 |
| Stem Length | 6 mm | 3 – 12 |
| Stem Diameter | 1.5 mm | 0.5 – 3 |
| Crown Diameter | 5 mm | 2 – 8 |
| Crown Thickness | 2 mm | 0.5 – 4 |
| Bearing Boss Dia | 1.8 mm | 1 – 3 |
| Bearing Boss Height | 0.6 mm | 0.2 – 1.5 |
| Bearing Chamfer | 0.1 mm | 0 – 0.3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
STEPSTLGLB14 PARAMS
Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
STEPSTLGLB12 PARAMS