Mechanical parts
Frame Drone FPV 5 inch Detail (gaya Mario)
- Bounding box
- 195.2 × 195.2 × 33 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Versi lebih detail frame drone 5 inch 3D print gaya SpeedyBee Mario: ujung arm bercabang, slot ringan di arm, slot strap baterai, counterbore baut, cage kamera FPV depan, blok belakang XT60 + antena
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor depan-belakang dari tengah | 80 mm | 60 – 100 |
| Jarak motor kiri-kanan dari tengah | 80 mm | 60 – 100 |
| Tebal arm / bottom plate | 5 mm | 4 – 6 |
| Lebar arm di pangkal | 24 mm | 18 – 30 |
| Lebar arm di ujung | 13 mm | 10 – 18 |
| Diameter dudukan motor | 27 mm | 24 – 32 |
| Pola baut motor, 16 = 16x16 | 16 mm | 12 – 19 |
| Lebar slot ringan di arm | 5 mm | 3 – 8 |
| Panjang body | 124 mm | 100 – 150 |
| Lebar body | 38 mm | 34 – 46 |
| Tinggi ruang stack FC/ESC | 28 mm | 24 – 34 |
| Tebal top plate | 4 mm | 3 – 5 |
| Diameter pillar | 9 mm | 8 – 12 |
| Lebar slot strap baterai | 20 mm | 12 – 25 |
| Jendela kamera FPV | 21 mm | 18 – 26 |
| Lebar slot XT60 | 16.5 mm | 12 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.