Mechanical parts
Parametric Hinge
- Bounding box
- 80 × 66 × 8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
make a hinge
Parameters
| Name | Value | Range |
|---|---|---|
| Hinge length | 60 mm | 30 – 150 |
| Leaf width from pin axis | 40 mm | 20 – 120 |
| Leaf thickness | 3 mm | 1.2 – 8 |
| Knuckle diameter | 8 mm | 4 – 24 |
| Pin diameter | 4 mm | 2 – 12 |
| Central knuckle width | 20 mm | 8 – 80 |
| Pin clearance | 0.2 mm | 0.1 – 0.6 |
| Gap between knuckles | 0.4 mm | 0.2 – 2 |
| Screw hole diameter | 3.4 mm | 2 – 8 |
| Screw hole distance from centre | 18 mm | 4 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SWYFT Reference-Style 3.5 inch Mold 16mm
One-piece open casting mold following the user's uploaded SWYFT wheel design brief. Outside diameter including rounded tabs: 88.9 mm. Cavity thickness: 16 mm. 12 curved spokes. Cir
Stepped Shaft with Keyway
Create a stepped cylindrical shaft in C45 steel, length 120 mm, diameter 30 mm, featuring an 8x7 mm parallel keyway slot."
Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
