Loading the interactive model…
Interactive 3D model of Drone Frame with Removable PlatesEverything else
Drone Frame with Removable Plates
71 views
- Bounding box
- 244.9 × 244.9 × 26.4 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
This Model is vertically integrated but I want two separate pieces, one above and one below.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub side | 30 mm | 15 – 60 |
| Hub thickness | 10 mm | 5 – 20 |
| Hub mount hole dia | 3.2 mm | 2 – 6 |
| Hub mount hole offset from center | 10 mm | 5 – 25 |
| Arm length | 60 mm | 30 – 120 |
| Arm width | 12 mm | 6 – 24 |
| Arm thickness | 6 mm | 3 – 12 |
| Motor mount hole dia | 3.2 mm | 2 – 6 |
| Motor mount spacing | 16 mm | 8 – 30 |
| Motor mount offset from tip | 8 mm | 3 – 20 |
| Guard inner diameter | 120 mm | 80 – 200 |
| Guard outer diameter | 130 mm | 90 – 210 |
| Guard height | 10 mm | 5 – 20 |
| Top plate thickness | 3 mm | 1 – 6 |
| Bottom plate thickness | 3 mm | 1 – 6 |
| Connection gap | 0.2 mm | 0.1 – 1 |
| Connection tab diameter | 1.5 mm | 0.8 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS