Loading the interactive model…
Interactive 3D model of DHT11 Temperature & Humidity SensorEverything else
DHT11 Temperature & Humidity Sensor
1 views
- Bounding box
- 15.5 × 5.5 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
build dht11 sensor
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 15.5 mm | 8 – 30 |
| Body Depth (Y) | 5.5 mm | 3 – 15 |
| Body Height (Z) | 12 mm | 5 – 30 |
| Vertical Corner Radius | 1 mm | 0 – 2.5 |
| Top Edge Fillet | 0.4 mm | 0 – 1.5 |
| Pin Count | 4 ea | 2 – 8 |
| Pin Pitch | 2.54 mm | 1 – 5.08 |
| Pin Diameter | 0.6 mm | 0.3 – 1.5 |
| Pin Length Below Body | 8 mm | 2 – 20 |
| Grille Rows | 4 ea | 1 – 10 |
| Grille Columns | 7 ea | 1 – 14 |
| Slot Width | 0.9 mm | 0.3 – 3 |
| Slot Height | 1.6 mm | 0.4 – 5 |
| Slot Pitch (X) | 1.6 mm | 0.6 – 6 |
| Slot Pitch (Z) | 2.1 mm | 0.8 – 8 |
| Slot Depth | 1 mm | 0.2 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS