Fittings and adapters
Rectangular Duct Adapter 105x33 to 57x30
- Bounding box
- 111.0 × 39.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 19, 2026
Download
Free to download and use. See the terms.
The prompt
I need to make a fan/air duct adapter from 105mmx33mm to 57mmx30 mm, each end needs to have 20mm of final dimension to act as a sleeve. Walls 2-3mm thick.
Parameters
| Name | Value | Range |
|---|---|---|
| Large End Width | 105 mm | 40 – 220 |
| Large End Height | 33 mm | 15 – 120 |
| Small End Width | 57 mm | 20 – 200 |
| Small End Height | 30 mm | 15 – 110 |
| Sleeve Length (each end) | 20 mm | 5 – 60 |
| Taper Length | 80 mm | 10 – 250 |
| Wall Thickness | 2.5 mm | 1.5 – 4.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Micrometer Expansion Tool
Turn Screw │ ▼ Micrometer Screw │ ▼ Tapered Cone Moves │ ▼ Four Jaws Expand Evenly