Fittings and adapters
Pump Skid Assembly (Motor + Inlet/Outlet Nozzles)
- Bounding box
- 1520.8 × 1440.8 × 426.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
펌프 생성해줘. 스키드가 있는 펌프이고, 모터가 있어. 그리고 기본적으로 input nozzle, output nozzle이 있어.
Parameters
| Name | Value | Range |
|---|---|---|
| Skid Length | 800 mm | 500 – 1400 |
| Skid Width | 400 mm | 250 – 800 |
| Skid Plate Thickness | 20 mm | 8 – 50 |
| Mounting Hole Dia | 20 mm | 8 – 40 |
| Mounting Hole Inset | 40 mm | 15 – 100 |
| Skid Top Edge Chamfer | 3 mm | 0 – 8 |
| Pump Position From Skid Front | 250 mm | 100 – 600 |
| Volute Casing Dia | 220 mm | 120 – 400 |
| Volute Casing Width | 90 mm | 50 – 200 |
| Shaft Centreline Height | 220 mm | 120 – 450 |
| Pedestal Width (along shaft) | 80 mm | 40 – 200 |
| Pedestal Depth (across skid) | 120 mm | 60 – 260 |
| Inlet Nozzle Dia | 80 mm | 30 – 250 |
| Outlet Nozzle Dia | 65 mm | 25 – 250 |
| Nozzle Length | 80 mm | 30 – 250 |
| Nozzle Flange Dia | 140 mm | 50 – 400 |
| Nozzle Flange Thickness | 16 mm | 6 – 50 |
| Motor Body Dia | 160 mm | 80 – 350 |
| Motor Body Length | 340 mm | 150 – 800 |
| Coupling Guard Length | 100 mm | 40 – 300 |
| Coupling Guard Dia | 120 mm | 50 – 250 |
| Cooling Fin Count | 12 pcs | 4 – 36 |
| Cooling Fin Depth | 15 mm | 3 – 40 |
| Cooling Fin Thickness | 6 mm | 2 – 20 |
| Motor Pedestal Length | 200 mm | 60 – 400 |
| Terminal Box Length | 140 mm | 20 – 300 |
| Terminal Box Width | 90 mm | 20 – 250 |
| Terminal Box Height | 45 mm | 20 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio