Fittings and adapters
Parkside to HBM Battery Adapter
- Bounding box
- 76.0 × 66.0 × 32.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
parkside to hbm battery adapter
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length (X) | 76 mm | 50 – 140 |
| Body Width (Y) | 66 mm | 40 – 120 |
| Body Height (Z) | 18 mm | 10 – 40 |
| Corner Radius | 6 mm | 0 – 12 |
| Socket Mouth Width | 44 mm | 20 – 90 |
| Socket Neck Width | 38 mm | 15 – 85 |
| Socket Lip Height | 5 mm | 1 – 15 |
| Socket Cavity Depth | 12 mm | 4 – 30 |
| Socket Slide Length | 70 mm | 20 – 130 |
| Terminal Pocket Length | 30 mm | 5 – 60 |
| Terminal Pocket Width | 26 mm | 5 – 50 |
| Terminal Pocket Depth | 3 mm | 0.5 – 5 |
| Contact Slot Count | 4 pcs | 1 – 8 |
| Contact Slot Length | 14 mm | 3 – 30 |
| Contact Slot Width | 3 mm | 1 – 10 |
| Contact Slot Pitch | 7 mm | 2 – 20 |
| Foot Base Width | 44 mm | 20 – 90 |
| Foot Neck Width | 34 mm | 15 – 85 |
| Foot Lip Height | 4 mm | 1 – 12 |
| Foot Height | 14 mm | 4 – 30 |
| Foot Length | 66 mm | 20 – 140 |
| Latch Notch Length | 20 mm | 3 – 50 |
| Latch Notch Width | 16 mm | 3 – 50 |
| Latch Notch Depth | 3 mm | 0.5 – 8 |
| Release Pocket Length | 26 mm | 5 – 60 |
| Release Pocket Depth | 3.5 mm | 1 – 10 |
| Release Pocket Height | 10 mm | 3 – 25 |
| Release Pocket Z-Centre | 8 mm | 2 – 30 |
| Mounting Hole Dia | 4.4 mm | 2 – 12 |
| Hole Spacing X | 56 mm | 10 – 130 |
| Hole Spacing Y | 54 mm | 10 – 110 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio