Enclosures and housings
Project boxes, electronics cases and covers, generated from a description of what goes inside them.
2479 models matchClear filters
Page 29 of 104
Galaxy Earbuds Case Assembly
create a case for galaxy earbuds, Box heights 37mm/ width 57mm, thickens 3mm, with lid heights 17mm and width 57mm with henges both box and lid.
Two-Solid Cover + Reservoir Assembly
Create a STEP assembly with exactly 2 separate existing solids. DO NOT rebuild, resize, scale, stretch, trim, fuse or modify either uploaded STEP body. Keep the wooden cover unch
4-Slot Geneva Mechanism (Driver Wheel + Maltese Cross)
Create a complete 2-part assembly of a 4-slot Geneva mechanism (Maltese cross mechanism) in millimeters, ready for mechanism simulation. Part 1 is the driving wheel: outer diameter
Brazilian Real Coin Counting Tray
Create a single-piece parametric FDM coin counting tray. Use millimeters. The tray must have five parallel U-shaped troughs for current Brazilian Real coins. Coins must stand vert
AAC Token Retainer Frame
Create one separate 3D printable mechanical part: a front retainer frame for an AAC picture token. Make one watertight solid body. Frame shape: - Rounded square frame - Outside s
Diesel TDC Combustion Chamber Volume
Generate a single, watertight, solid 3D CAD part representing the closed combustion-chamber volume of a single-cylinder diesel engine at top dead centre (TDC), suitable for CFD sim
Stair Reinforcement Detail
Create a professional reinforced-concrete stair reinforcement detail for the Taylor Art Hub. ## SHEET A3 Scale: **1:20** Use a clean structural engineering CAD detailing style
Dovetail Slide Rail
I need a rail for slide inside a cube
Rectangular wooden frame cover with divider and slots
Create directly a single clean parametric CAD solid according to the following dimensions. Do not ask questions and do not add components or features not explicitly specified. Ove
Beetle-Style Compact SUV Body
Has un beetle pero SUV como el de la imagen quiero la leída para solid works
Hollow Square Tube with Cross Holes
Create a 3D CAD model of a straight hollow square tube with a cross hole near each end. Units: millimetres. Geometry: - Tube: 114 mm long with a 6 mm x 6 mm square outer cross-sec
Great Pyramid Experimental Support Assembly
Design a 3D-printable experimental support assembly for a Great Pyramid model (145 × 145 × 92.31 mm). Produce THREE separate, removable components: 1. Base. 2. Vertical pillar. 3
Wearable Enclosure Box
Create a 3D-printable rectangular enclosure box for an electronic wearable. Dimensions: 60mm length, 35mm width, 20mm height. Wall thickness 2mm. Rounded outer corners (fillet 3mm)
iPhone 17 Two-Piece Protective Case
iPhone 17 phone case, inner and outer shell.
Injection Mold for Parallel Cu Plates
design a mold that will be fit in it 2 parallel circular cu plates of thickness 0.5 mm and outer diameter 24mm and the distance between parallel plates is 0.3 mm the plates have wi
RC Car Chassis Base Plate
Design a flat rectangular base plate for an RC car chassis as a single solid part. Units: millimeters. OVERALL SIZE - 635 mm long (Y axis) x 381 mm wide (X axis) x 8 mm thick (Z a
Integrated 3-Fin Rocket Collar
Integrated 3-Fin Rocket Collar/Ring Module (Zero-Alignment Error) "A single-piece 3D printable water rocket fin attachment collar for a 67.1mm diameter 500ml Coca-Cola bottle. Cons
Articulated Neck Collar
Articulated neck collar, units mm, Z up, front = -Y, collar axis = Z. Neck inner diameter 109, ring wall 4 (outer R 58.5). Two open C-shaped rings (60 deg gap centered at front, 27
8020 Series 10 Box Frame
Creating a box out of 8020 extruded aluminum 10 series that needs to be 18 inches wide
Nissan Sunny Truck B120 reference-corrected 1:24 v3
B120/L-B122 Sunny Truck standard short bed round headlamp, modular 1:24 print study. V3 fixes rail width so overall extents match published dimensions. Still undergoing silhouette
Rigid Flange Coupling 4-Bolt (100 mm OD, 90 mm PCD)
Create a 3D rigid flange coupling with the following dimensions in millimetres: - Flange outer diameter: 100 mm - Bolt circle diameter (PCD): 90 mm - Bolt holes: 4 holes, each 12
4-Compartment Snap-Box
where is the hinge on the lids and the buckle isnt right. Its not that complicated. I just want a box with 4 lids for 4 compartments that snap in place using a buckle like thing an
Trigger Spray Bottle (Simplified)
Create a manufacturable 3D CAD model of a 750 mL HDPE trigger spray bottle. Overall height: 280 mm Maximum width: 95 mm Maximum depth: 62 mm Neck finish: 28/410 Neck outer diamet
Jambe gauche de mannequin articulée 850 mm
salut peut eu me dessiner une jambes gauche de mannequin de 850mm de hauteur avec une articulation au genoux et a la cheville en metal avec des materiaux de recup sur solidworks s
Showing 24 of 2479 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
