Enclosures and housings
4-Slot Geneva Mechanism (Driver Wheel + Maltese Cross)
- Bounding box
- 140.7 × 100.0 × 30.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- November 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete 2-part assembly of a 4-slot Geneva mechanism (Maltese cross mechanism) in millimeters, ready for mechanism simulation. Part 1 is the driving wheel: outer diameter 100 mm, thickness 15 mm, central through hole diameter 20 mm, featuring a driving pin on top with a diameter of 10 mm and height of 15 mm located at a radius of 35 mm. Part 2 is a single solid piece (single body, non-fragmented) 4-slot Geneva mechanism cross (Maltese cross). The cross must be fully connected as one contiguous part with a central solid hub. Outer diameter must be 90 mm, overall thickness 15 mm. In the exact center of the hub, create a through hole with a diameter of strictly 25 mm. The 4 radial slots must be evenly spaced, fully connected to the central body, designed to fit the 10 mm driving pin. Both parts must be aligned properly and exported as a STEP file.Create a 3D CAD model of a Geneva drive driver wheel in millimeters. Outer diameter 100 mm, thickness 15 mm. In the center, create a through hole with a diameter of 20 mm. On top face, add a cylindrical driving pin with a diameter of 10 mm and height of 15 mm, positioned at a radius of 35 mm from the center. Export as STEP file.Create a single solid piece (single body, non-fragmented) 4-slot Geneva mechanism cross (Maltese cross) in millimeters. The cross must be fully connected as one contiguous part with a central solid hub. Outer diameter must be 90 mm, overall thickness 15 mm. In the exact center of the hub, create a through hole with a diameter of strictly 25 mm. The 4 radial slots must be evenly spaced, fully connected to the central body, designed to fit a 10 mm driving pin. Export as STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Driver Outer Diameter | 100 mm | 60 – 200 |
| Driver Thickness | 15 mm | 5 – 40 |
| Driver Bore Diameter | 20 mm | 5 – 40 |
| Driving Pin Diameter | 10 mm | 4 – 20 |
| Driving Pin Height | 15 mm | 5 – 40 |
| Driving Pin Radius Position | 35 mm | 15 – 80 |
| Cross Outer Diameter | 90 mm | 40 – 160 |
| Cross Thickness | 15 mm | 5 – 40 |
| Cross Hub Bore Diameter | 25 mm | 5 – 40 |
| Slot Count | 4 count | 3 – 8 |
| Slot Width | 10 mm | 4 – 20 |
| Slot End-Cap Center Radius | 20 mm | 18.5 – 30 |
| Locking Arc Radius | 20 mm | 10 – 26 |
| Center Distance | 49.5 mm | 20 – 100 |
| Assembly Pose Rotation | 45 deg | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,