Fittings and adapters
5 mL Oral Syringe Assembly
- Bounding box
- 35.0 × 26.0 × 74.5 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
Nominal capacity 5 mL Barrel internal diameter ~12 mm Required 5 mL plunger travel ~44.2 mm Barrel external diameter ~15 mm, subject to glass wall requirements Scale 0–5 mL Minor graduations 0.1 mL Major graduations 0.5 mL, numbered every 1 mL Tip Central oral/enteral-only tip Tip requirement Must not accept a hypodermic needle or Luer fitting Plunger Fully removable for cleaning Plunger seal Replaceable/removable food/medical-grade silicone Protective grip Removable bright silicone sleeve around glass barrel Finger grip Rounded/wide enough for one-handed dosing Materials Borosilicate glass + suitable polymer/silicone components Markings Permanent, high-contrast; not printed ink that wears off
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel Internal Dia | 12 mm | 6 – 30 |
| Barrel External Dia | 15 mm | 8 – 36 |
| Graduated Body Length | 50 mm | 20 – 90 |
| Oral Tip Length | 10 mm | 4 – 25 |
| Oral Tip Outside Dia | 6 mm | 3 – 12 |
| Oral Tip Bore Dia | 3 mm | 1 – 6 |
| Zero Line Height | 4 mm | 1 – 20 |
| Scale Maximum | 5 mL | 1 – 20 |
| Plunger Travel (0 to Full) | 44.2 mm | 10 – 90 |
| Minor Graduation | 0.1 mL | 0.05 – 0.5 |
| Major Graduation | 0.5 mL | 0.1 – 2 |
| Numbered Graduation | 1 mL | 0.5 – 5 |
| Engraving Depth (Numbered) | 0.25 mm | 0.05 – 0.6 |
| Plunger Rod Dia | 6 mm | 3 – 12 |
| Plunger Rod Length | 60 mm | 30 – 120 |
| Thumb Head Dia | 20 mm | 10 – 40 |
| Thumb Head Thickness | 3 mm | 1 – 8 |
| Seal Outside Dia | 12 mm | 6 – 30 |
| Seal Thickness | 5 mm | 2 – 12 |
| Sleeve Inside Dia | 15 mm | 8 – 36 |
| Sleeve Outside Dia | 19 mm | 10 – 42 |
| Sleeve Length | 35 mm | 10 – 60 |
| Sleeve Bottom Height | 6 mm | 0 – 30 |
| Flange Bore Dia | 15 mm | 8 – 36 |
| Flange Overall Width | 35 mm | 20 – 70 |
| Flange Thickness | 3 mm | 1 – 8 |
| Flange Central Collar Dia | 26 mm | 16 – 50 |
| Wing Height (Y) | 16 mm | 8 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Tapered Drainage Basket
Specifications: * Overall shape: Tapered rectangular prism (open at the top). * Overall height: 99 mm. * Wall thickness: 1.0 mm. * Bottom thickness: 1.5 mm. * Top outside dimensio