Every model here started as a sentence
Real parts generated from plain text prompts. Each one shows the exact prompt and parameters that produced it, and every file is free to download.
5314 models matchClear filters
Page 14 of 222
Matching models
Cisco SG300-10 10-Port Switch
cisco sg300 10 ports
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
18V 20A EI Transformer, split spools
the secondary and primary wire spoll should be on each side of the iron core.
Aluminum Bracket Plate 120x80x10
Crea un plano técnico ortogonal de un soporte de aluminio de 120 x 80 x 10 mm, con cuatro perforaciones M6 en las esquinas, vista frontal y superior, líneas blancas sobre fondo azu
Floor-Mounted C-Channel ACCU Bracket
create a dwg drawing of the installation of the bracket based on this photo, how will you install the bracket support to the floor, and how will you mount the ACCU. using a C chann
Rueda 60mm con eje de motor
necesito que hagas una rueda de 6cm de radio y que en el centro tenga un hueco de 1cm para poder conectar un motor
Open-Top Electronics Enclosure
A 3D-printable rectangular electronics enclosure box without a lid, outer dimensions 115 mm length (X-axis), 80 mm width (Y-axis), and 36 mm height (Z-axis), with a uniform wall th
DeWalt XR V4 materialoptimerad - justerbar
Parametrisk materialoptimerad batterihållare, ungefärlig nykonstruktion; batteripassform behöver provas.
Family House with Garden
family house for 5 members, 3 bedrooms, 4 bathrooms, terrace, storage, working room, garden
Linkage Lever Bar
Create a flat mechanical linkage lever bar 45 mm long between hole centers, 10 mm wide, and 3 mm thick with fully rounded ends (5 mm radius). Cut a 3.2 mm through-hole at one end c
Cubic Profile Vessel
Create a single-piece, hollow, rotationally symmetric vessel, similar to a drinking glass but without a handle. IMPORTANT: The internal wall profile must follow this exact cubic m
X96 Air TV Box Enclosure
tôi muốn vẽ lại box cho tv box x96 air
Curtain Rod Wall Bracket
perde takma aparatı
Photo stand
зроби зображення в автокаді
Cilindro maestro y receptor hidráulico
Nescesito que realizes piesa por piesa de un cilindro maestro y el cilindro receptor dados estpos planos
Football goal 5m x 2m
Będę robił bramke do piłki noznej z profili stalowych bramka bedzie miała 5m x 2m zrob to potem bedziemy dorabiac na bierząco
Eyedrop Bottle Holder 2x3 (compact)
Can you make it more compact. Contoured around the bottles. Using less plastic is good
Kamerafäste v21A – gångjärn + spaklås
Kamerafäste för DJI Osmo 360 II på hundväst, v21A: bygeln sitter med gångjärn (M3-axel) på vänster sida och spaklås på höger sida, så den inte kan vicka eller glida ur vid sidotryc
ESP32 DevKit Desk Stand
i WAnt to make a ESP 32 Holder
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol
Trivoice 2.0 Mic Holder and 45x50 Speaker Mount
Update the Trivoice enclosure with a dedicated INMP441 microphone holder, separately labelled MIC, and a 50 x 45 mm speaker locating rim on the lid. Add four M3 clearance holes, ca
Christmas LED Lighter Topper
Christmas figures for led lighters
Zahnbürsten-Ablage mit herausnehmbarem Tropfgitter
Erstelle mir eine Ablage für eine Zahnbürste mit herausnehmbaren Gitter zum Abtropfen und leichten reinigen.
Krishna Pendant with Stones
make this pendent in total size from top to bottom is 25.5 mm , take the offset of .7 for the base , and add stones of 1 mm ,
Showing 24 of 5314 models
Show 50 moreDescribe a part, get a model
Write your own description and export STEP or STL when it looks right. Adjusting dimensions afterwards never costs a generation.
