Brackets and mounts
Floor-Mounted C-Channel ACCU Bracket
- Bounding box
- 180 × 138 × 252.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
create a dwg drawing of the installation of the bracket based on this photo, how will you install the bracket support to the floor, and how will you mount the ACCU. using a C channel. Generate the complete DXF detail and include plan, elevation and section view You cant mount the bracket to the wall, it should only be mounted on the floor
Parameters
| Name | Value | Range |
|---|---|---|
| ACCU body diameter | 60 mm | 20 – 200 |
| ACCU body length | 120 mm | 40 – 400 |
| Channel flange width | 40 mm | 20 – 120 |
| Channel depth | 20 mm | 10 – 80 |
| Channel wall thickness | 3 mm | 2 – 10 |
| Post height above base plate | 170 mm | 40 – 600 |
| Arm length from back of post | 110 mm | 40 – 400 |
| Base plate length X | 180 mm | 60 – 400 |
| Base plate width Y | 130 mm | 60 – 400 |
| Base plate thickness | 8 mm | 4 – 25 |
| Floor anchor hole diameter | 14 mm | 3 – 30 |
| Anchor hole inset from plate edge | 15 mm | 8 – 60 |
| Saddle width X | 80 mm | 40 – 220 |
| Saddle length Y | 50 mm | 20 – 200 |
| Saddle height | 45 mm | 20 – 160 |
| Cradle floor below ACCU | 10 mm | 2 – 40 |
| Strap thickness | 6 mm | 3 – 15 |
| Strap width Y | 40 mm | 10 – 200 |
| Sliding fit clearance | 0.3 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu