Enclosures and housings
X96 Air TV Box Enclosure
- Bounding box
- 110 × 110 × 26.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 47
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
tôi muốn vẽ lại box cho tv box x96 air
Parameters
| Name | Value | Range |
|---|---|---|
| PCB length | 100 mm | 50 – 200 |
| PCB width | 100 mm | 50 – 200 |
| PCB mounting hole spacing X | 80 mm | 20 – 180 |
| PCB mounting hole spacing Y | 80 mm | 20 – 180 |
| Gap between PCB and wall | 3 mm | 1 – 10 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Floor thickness | 2.5 mm | 1.5 – 6 |
| PCB height above floor | 4 mm | 2 – 12 |
| Component height above PCB | 16 mm | 5 – 40 |
| Clearance above components | 1.5 mm | 0.5 – 10 |
| Outer corner radius | 12 mm | 2 – 30 |
| Lid plate thickness | 2.5 mm | 1.5 – 6 |
| Lid locating lip height | 3 mm | 1 – 8 |
| Lid locating lip thickness | 1.8 mm | 1.2 – 4 |
| Lip clearance to wall | 0.25 mm | 0.15 – 0.6 |
| Corner boss diameter | 7 mm | 5 – 12 |
| Boss centre inset from outer edge | 7 mm | 4 – 15 |
| M3 clearance hole | 3.4 mm | 2.5 – 6 |
| M3 pilot hole | 2.5 mm | 1.8 – 5 |
| Pilot hole depth | 10 mm | 5 – 25 |
| Screw head counterbore dia | 6.2 mm | 4 – 12 |
| Counterbore depth | 1.8 mm | 0.5 – 5 |
| PCB standoff diameter | 6.5 mm | 4 – 12 |
| Bottom of port openings above bed | 7 mm | 2 – 20 |
| X of first opening left edge | -42 mm | -60 – 0 |
| Gap between openings | 2.5 mm | 1 – 10 |
| AV jack opening width | 7.5 mm | 4 – 20 |
| AV jack opening height | 6 mm | 3 – 20 |
| HDMI opening width | 15 mm | 8 – 30 |
| HDMI opening height | 6.5 mm | 4 – 20 |
| USB-A opening width | 12.5 mm | 8 – 30 |
| USB-A opening height | 6.5 mm | 4 – 20 |
| RJ45 opening width | 15 mm | 8 – 30 |
| RJ45 opening height | 13 mm | 6 – 25 |
| DC jack opening width | 8 mm | 4 – 20 |
| DC jack opening height | 5.5 mm | 3 – 20 |
| IR window width | 7 mm | 3 – 20 |
| IR window height | 4 mm | 2 – 15 |
| IR window X position | -20 mm | -50 – 50 |
| IR window bottom height | 8 mm | 2 – 20 |
| LED hole diameter | 3 mm | 1.5 – 8 |
| LED hole X position | 20 mm | -50 – 50 |
| LED hole height | 12 mm | 2 – 25 |
| Vent slot width | 3 mm | 1.5 – 10 |
| Vent slot length | 60 mm | 10 – 120 |
| Vent slot pitch | 6.5 mm | 3 – 20 |
| Number of vent slots | 9 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,