Everything else
18V 20A EI Transformer, split spools
- Bounding box
- 125.6 × 68.6 × 90 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
the secondary and primary wire spoll should be on each side of the iron core.
Parameters
| Name | Value | Range |
|---|---|---|
| Centre leg width | 36 mm | 20 – 80 |
| Window width | 18 mm | 10 – 40 |
| Window height | 54 mm | 30 – 120 |
| Yoke / outer limb thickness | 18 mm | 10 – 40 |
| Lamination stack depth | 48 mm | 20 – 120 |
| Bobbin wall thickness | 2.5 mm | 1.2 – 5 |
| Bobbin flange thickness | 2.5 mm | 1.2 – 5 |
| Primary winding radial build | 3 mm | 1 – 10 |
| Secondary winding radial build | 6 mm | 1 – 12 |
| Winding corner radius | 5 mm | 1 – 12 |
| Flange overhang past winding | 2 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm