Jigs and fixtures
Wrung-Rib Planter on Arcade Stand
- Bounding box
- 112.7 × 112.7 × 169.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Redo of the plant pot, inspired by reference images (fine vertical ribbing, swirl ribs, contrasting base with hidden drip tray, arched stand) but a new idea: a barrel planter whose fine ribs wring into a diagonal swirl at the belly and straighten again at the rim, floating above a hidden drip tray on an arcade pedestal stand. 3D printable.
Parameters
| Name | Value | Range |
|---|---|---|
| Height of the ribbed body | 100 mm | 60 – 160 |
| Body radius where the ribs begin | 42 mm | 34 – 60 |
| Radius at the rim | 50 mm | 36 – 70 |
| Extra belly width at mid-height | 10 mm | 0 – 20 |
| Wall thickness at the rib valleys | 3.2 mm | 2 – 6 |
| Floor thickness | 6 mm | 4 – 8 |
| Number of fine ribs | 64 mm | 24 – 120 |
| Rib depth | 1.2 mm | 0.4 – 3 |
| Total swirl, peaking at mid-height | 90 deg | 0 – 180 |
| Smooth band at base and rim | 10 mm | 4 – 30 |
| How far the foot steps in from the body | 6 mm | 3 – 10 |
| Foot height that nests in the tray | 14 mm | 12 – 24 |
| Drain hole diameter | 8 mm | 4 – 14 |
| Extra holes around the centre hole | 6 mm | 0 – 10 |
| Arcade pedestal height | 40 mm | 24 – 80 |
| Number of arched windows | 8 mm | 5 – 10 |
| Arched window width | 20 mm | 12 – 24 |
| Central column radius | 10 mm | 6 – 16 |
| Hidden tray floor thickness | 4 mm | 3 – 8 |
| Water gap under the planter | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs