Jigs and fixtures
Wooden Rocket Fin Jig
- Bounding box
- 750.0 × 750.0 × 18.1 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
Can you create this wooden rocket fin jig. The U shape cut out diameter must be 8 inches. The diagonal cuts should be 45 degrees from the top horizontal edge. The jig should be 75 cm wide and 75cm height
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 750 mm | 100 – 1200 |
| Height | 750 mm | 100 – 1200 |
| Board Thickness | 18 mm | 5 – 50 |
| U Cutout Diameter | 203.2 mm | 50 – 500 |
| Diagonal Cut Angle | 45 deg | 10 – 80 |
| Diagonal Cut Depth | 75 mm | 10 – 300 |
| Hole Diameter | 5 mm | 2 – 20 |
| Bottom Hole Count | 10 | 1 – 20 |
| Left Hole Count | 8 | 1 – 20 |
| Hole Edge Margin | 30 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs