Jigs and fixtures
Waveshare ESP32-S3 Touch LCD-2 – Landscape Buddy Monitor
- Bounding box
- 58.8 × 37.1 × 33.8 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Zweiteiliges, dunkles Landscape-Gehäuse mit glatter Front, integriertem Desktop-Standfuß und rechter Seitenkante für USB-C sowie Boot/Reset. Mechanischer Entwurf; vor dem Druck Board- und Portlage prüfen.
Parameters
| Name | Value | Range |
|---|---|---|
| Gehäusebreite | 58.8 mm | 58.8 – 62 |
| Gehäusehöhe | 37.1 mm | 37.1 – 40 |
| Gehäusetiefe | 12 mm | 10 – 16 |
| Seitenwandstärke | 1.4 mm | 1 – 2 |
| Frontstärke | 2 mm | 1.5 – 3 |
| Displayöffnung Breite | 41.2 mm | 40 – 42 |
| Displayöffnung Höhe | 31 mm | 30 – 32 |
| Außeneckenradius | 2.6 mm | 1.5 – 3.5 |
| M2 Schraubloch Durchmesser | 2.3 mm | 2.1 – 2.8 |
| Interner Befestigungsboss | 4.5 mm | 3.5 – 5.5 |
| USB-C Öffnung entlang Seitenkante | 11.3 mm | 10 – 12 |
| USB-C Öffnung Tiefe | 6.8 mm | 6 – 8 |
| Boot/Reset Lochdurchmesser | 2.5 mm | 2 – 3.2 |
| Standneigung | 60 deg | 50 – 70 |
| Standfußbreite | 48 mm | 42 – 54 |
| Standfußtiefe | 28 mm | 22 – 34 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs