Jigs and fixtures
Watch Charging Stand
- Bounding box
- 55.0 × 55.0 × 35.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable circular watch charging stand with an outer diameter of 55 mm and a total height of 35 mm. 1. At the top, create a stepped circular recess with an inner diameter of 44 mm and a depth of 6 mm to cradle a watch bezel. 2. Inside that recess, create a lower circular pocket with a diameter of 32 mm and a depth of 3 mm to hold a 31 mm circular LED PCB. 3. Place a central pass-through hole of 8 mm in the floor of the LED pocket for cable routing. 4. Add four 3 mm side ventilation slots around the base perimeter to exhaust heat. 5. Add a rectangular cutout on the bottom side measuring 10 mm wide by 5 mm high for a USB cable exit.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 55 mm | 20 – 80 |
| Total Height | 35 mm | 20 – 60 |
| Top Recess Diameter | 44 mm | 30 – 50 |
| Top Recess Depth | 6 mm | 2 – 10 |
| LED Pocket Diameter | 32 mm | 20 – 40 |
| LED Pocket Depth | 3 mm | 1 – 6 |
| Central Hole Diameter | 8 mm | 4 – 12 |
| Vent Slot Width | 3 mm | 1 – 6 |
| Vent Slot Height | 8 mm | 2 – 15 |
| Vent Slot Count | 4 mm | 2 – 8 |
| USB Cutout Width | 10 mm | 6 – 16 |
| USB Cutout Height | 5 mm | 2 – 8 |
| USB Cutout Angle | 45 degree | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs