Jigs and fixtures
Velodrome 250m Cycling Track
- Bounding box
- 380 × 215 × 30.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
UCI velodrome cycling track, 250m stadium oval shape, 380mm total length, 215mm width, 30mm wide sloped track surface, 13 degree banking on straight sections, 43 degree steep banking in curves, 2mm wall thickness, flat bottom base for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall oval length | 380 mm | 150 – 600 |
| Overall oval width | 215 mm | 80 – 400 |
| Width of the riding surface | 30 mm | 10 – 80 |
| Banking on the straights | 13 deg | 0 – 40 |
| Banking in the curves | 43 deg | 0 – 60 |
| Base / inner edge thickness | 2 mm | 1.2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs