Twin Bathroom Block 3x5 m (2 x 2.5 m compartments)

Create an accurate, fully editable 3D CAD model based strictly on the attached 2D architectural floor plan. **OVERALL DIMENSIONS:** - Width: 3.00 meters. - Length: 5.00 meters. - Total area: 15 m². - Two sections, each measuring 3.00 × 2.50 meters. **ARCHITECTURAL LAYOUT:** - Reproduce all external walls and internal partitions exactly as shown. - Two entrance doors on the left wall, each 90 cm wide, opening inward. - Two separate oval washbasins, one in each section. - Each washbasin unit has an indicated width of 50 cm and length of 1.20 m. - Two toilets positioned against the right wall, one in each section. - Two separate open shower/foot-washing areas in the upper-right and lower-right corners. - Preserve all partition walls, openings, fixture orientations, and circulation spaces. - Respect all dimensions shown in the reference image, including 1.25 m, 1.00 m, 1.20 m, and 65 cm. **3D MODEL REQUIREMENTS:** Use metric units and a 1:1 scale. Create realistic wall thicknesses, sanitary fixtures, doors, ceramic flooring, tiled walls, faucets, showers, and floor drains. Suggested editable assumptions: external walls 15 cm thick, internal walls 10 cm thick, and ceiling height 2.80 m. **OUTPUT:** Generate a dimensionally accurate 2D floor plan, a complete 3D model, an isometric view, and a top view without the roof. Export to DWG/DXF and OBJ/GLB if supported. **STRICT INSTRUCTIONS:** Do not redesign or modify the original layout. Do not add or remove doors, walls, toilets, or washbasins. Do not convert open shower areas into enclosed cabins. The attached image is the primary geometric reference. Reconstruct the 2D geometry first, verify all dimensions, and then generate the 3D model. Prioritize architectural accuracy over visual decoration.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.