Jigs and fixtures
Toy Car Display Stand
- Bounding box
- 90 × 46 × 35 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Oyuncak araba standı
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 90 mm | 60 – 160 |
| Overall width | 46 mm | 30 – 90 |
| Platform height at the low front end | 7 mm | 3 – 25 |
| Platform height at the high back end | 28 mm | 8 – 60 |
| Front lip height above the platform | 6 mm | 0 – 20 |
| Front lip depth along the length | 6 mm | 2 – 16 |
| Side rail height above the platform | 7 mm | 0 – 20 |
| Side rail thickness | 3 mm | 1.2 – 8 |
| Bed edge chamfer | 2 mm | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs