Fittings and adapters
Toothpaste Tube Squeezer
- Bounding box
- 147.5 × 70 × 80 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a functional toothpaste tube squeezer for 3D printing. It should have a flat rectangular base, two vertical supports, and a horizontal rotating roller between the supports. The roller must have a slot to hold the flattened end of a toothpaste tube. Add a hand crank to one side of the roller. The toothpaste tube must fit between the roller and the base so that turning the crank winds the tube and squeezes toothpaste toward the nozzle. Make the design compact, simple, strong, and easy to print. Generate an editable 3D CAD model and allow me to export it as an STL file.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 120 mm | 100 – 200 |
| Base depth | 70 mm | 40 – 140 |
| Base thickness | 8 mm | 4 – 16 |
| Support height from bed | 30 mm | 30 – 70 |
| Support plate thickness | 8 mm | 4 – 14 |
| Clear span between supports | 82 mm | 60 – 84 |
| Support width at bottom | 34 mm | 20 – 60 |
| Support width at top | 20 mm | 14 – 50 |
| Roller length | 80 mm | 40 – 80 |
| Roller diameter | 20 mm | 16 – 30 |
| Gap above base for tube | 3 mm | 2 – 6 |
| Tube slot width | 3 mm | 1.5 – 6 |
| Tube slot depth | 10 mm | 2 – 8 |
| Axle diameter | 8 mm | 5 – 12 |
| Left axle stub length | 10 mm | 6 – 20 |
| Crank length from axle | 50 mm | 20 – 90 |
| Crank arm width | 10 mm | 6 – 20 |
| Crank arm thickness | 8 mm | 4 – 14 |
| Crank hub diameter | 22 mm | 14 – 34 |
| Knob pin diameter | 10 mm | 5 – 14 |
| Knob pin length | 10 mm | 6 – 20 |
| Knob diameter | 18 mm | 12 – 30 |
| Knob length | 20 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Huawei Band Whoop Strap Adapter
i want to make whoop adapter for my huawei band 11 pro
SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Two-Loop Tesla Valve Fan Manifold
$fn=40; // WIFCO Tesla Valve Fan Prototype // Units: mm // PART: 0=lower, 1=upper, 2=fan adapter PART=0; L=220; W=224; H=150; S=75; module path(p,r=7){ for(i=[0:len(p)-2]) hul
Ninja 250R Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
EX250 to VZ21 Short-Runner Turbo Manifold
I wish to make an exhaust to turbo manifold. It needs to be as short as possible going from a motorcycle engine of a 2008 ninja 250r into the turbo. These headers do not have to b
Bushed pin flanged coupling assembly
i want that bushed pin type flanged coupling as a assembly file.... please the measurement and design that assembly...ask me what else you want from me
