Jigs and fixtures
Tilted Phone Stand
- Bounding box
- 100 × 60 × 75.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Make a rectangular phone stand, 100 mm wide, 60 mm deep, 8 mm thick, tilted at 15 degrees, suitable for 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 100 mm | 40 – 200 |
| Base depth | 60 mm | 40 – 150 |
| Base / backrest plate thickness | 8 mm | 4 – 20 |
| Backrest tilt from vertical | 15 deg | 5 – 40 |
| Backrest length along its slope | 70 mm | 40 – 140 |
| Shelf depth in front of backrest | 14 mm | 10 – 45 |
| Front lip height above shelf | 6 mm | 2 – 20 |
| Front lip thickness | 6 mm | 3 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs