Jigs and fixtures
Tilted Paint Bottle Rack
- Bounding box
- 196.0 × 70.0 × 45.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Modular drawer organizer rack for 38mm diameter acrylic paint bottles, tilted at a 20-degree low profile angle so total vertical height is under 7cm
Parameters
| Name | Value | Range |
|---|---|---|
| Number of Bottles | 4 | 1 – 10 |
| Bottle Diameter | 38 mm | 20 – 60 |
| Hole Clearance | 2 mm | 0 – 5 |
| Hole Spacing | 48 mm | 30 – 80 |
| Edge Margin | 6 mm | 2 – 20 |
| Block Width | 70 mm | 30 – 120 |
| Block Height | 45 mm | 20 – 68 |
| Pocket Depth | 22 mm | 5 – 35 |
| Tilt Angle | 20 deg | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs