Jigs and fixtures
Threaded Outer Canister Cylinder
- Bounding box
- 80.0 × 80.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
unpressurised outer canister cylinder that is 200mm tall, 80mm wide, with a wall thickness of 4mm, featuring a standard 1/4-inch threaded opening at the top and bottom.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 80 mm | 40 – 200 |
| Overall Height | 200 mm | 50 – 500 |
| Wall Thickness | 4 mm | 1 – 10 |
| Cap Thickness | 8 mm | 2 – 30 |
| Threaded Port Diameter | 6.35 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs