Jigs and fixtures
tapered phone stand flat pattern
- Bounding box
- 74 × 211 × 2.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a standard 2D DXF flat pattern script for a tapered aluminum phone desk stand. SPECIFICATIONS & DIMENSIONS: - Material Thickness: 2.0mm Aluminum (K-Factor = 0.42, Bend Radius = 2.0mm) - Total Unfolded Flat Length: 211.0mm - Base Section: 74.0mm wide x 81.0mm long (rectangular base with 8mm corner radii) - Middle Spine Section: Tapered transition from 57.0mm wide to 40.0mm wide across a 100.0mm length - Upper Cradle Section: 40.0mm wide with a 15.0mm deep cradle floor and an 18.0mm vertical front lip INTERNAL CUTOUTS & FEATURES: 1. Centered Cable Cutout (Spine): Oval slot 14mm x 45mm located on the back spine centered along X. 2. Anti-slip Pad Recess: Top rubber pad marker 12mm x 6mm centered near the top edge. LAYERS REQUIREMENT: - OUTLINE (Color: White/7) - Continuous closed polyline for outer laser cutting path. - CUTOUTS (Color: Blue/5) - Internal cable management slots and openings. - BEND_LINES (Color: Red/1) - Reference dashed lines at Y=81.0mm (Base Bend), Y=181.0mm (Cradle Bottom Bend), and Y=196.0mm (Front Lip Bend). OUTPUT FORMAT: Provide standard ASCII DXF (R12/R2010 compliant) syntax or Python script utilizing ezdxf to output the file directly.
Parameters
| Name | Value | Range |
|---|---|---|
| Aluminium sheet thickness | 2 mm | 1 – 4 |
| Overall flat length along Y | 211 mm | 150 – 300 |
| Base bend line Y | 81 mm | 40 – 150 |
| Cradle bottom bend line Y | 181 mm | 100 – 260 |
| Front lip bend line Y | 196 mm | 120 – 280 |
| Base width | 74 mm | 40 – 150 |
| Base corner radius | 8 mm | 2 – 20 |
| Spine width at the base bend | 57 mm | 20 – 120 |
| Spine width at the cradle bend | 40 mm | 15 – 100 |
| Cradle floor / front lip width | 40 mm | 15 – 100 |
| Cable slot width | 14 mm | 5 – 40 |
| Cable slot overall length | 45 mm | 10 – 120 |
| Pad marker width | 12 mm | 4 – 40 |
| Pad marker height | 6 mm | 2 – 30 |
| Pad recess depth | 0.6 mm | 0.3 – 1.5 |
| Pad centre from the top edge | 8 mm | 2 – 40 |
| Scribe line width | 0.8 mm | 0.4 – 3 |
| Scribe depth | 0.3 mm | 0.1 – 1 |
| Dash length | 3 mm | 1 – 10 |
| Gap between dashes | 2 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs