Jigs and fixtures
Suspension Kitting Rack
- Bounding box
- 2400 × 1200 × 2390 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
I need a kitting rack for front suspension assembly where it store 10 RH+10 LH lower arm, 10 LH +10 RH upper arm, 20 coil spring and 20 Front shock absormer and 20 Rear shock absorber
Parameters
| Name | Value | Range |
|---|---|---|
| Caster wheel diameter | 150 mm | 80 – 250 |
| Overall caster height | 190 mm | 120 – 320 |
| Caster mounting plate | 100 mm | 60 – 160 |
| Base frame length | 2400 mm | 1200 – 3000 |
| Base frame width | 1200 mm | 600 – 2000 |
| Base frame height | 150 mm | 80 – 400 |
| Tube profile width | 80 mm | 40 – 150 |
| Post square tube | 80 mm | 40 – 150 |
| Post height | 2200 mm | 1000 – 3000 |
| Shelf length | 2200 mm | 800 – 2900 |
| Shelf width | 1100 mm | 400 – 1900 |
| Shelf overall height | 80 mm | 40 – 200 |
| Arm slots per shelf | 20 mm | 4 – 40 |
| Lower shelf bottom height | 600 mm | 200 – 2000 |
| Upper shelf bottom height | 1100 mm | 300 – 2200 |
| Bin length | 1100 mm | 400 – 2000 |
| Bin width | 600 mm | 300 – 1100 |
| Bin height | 300 mm | 100 – 600 |
| Bin floor height | 1500 mm | 900 – 2200 |
| Bin centre Y offset | 250 mm | -400 – 500 |
| Bin cross dividers | 3 mm | 1 – 6 |
| Rail length | 2200 mm | 800 – 2900 |
| Rail diameter | 40 mm | 15 – 80 |
| Rail Y position | -560 mm | -580 – 580 |
| Front shock rail height | 2280 mm | 1000 – 2700 |
| Rear shock rail height | 2120 mm | 900 – 2600 |
| Hooks per rail | 20 mm | 4 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs