3D preview of Stepped Slot Mechanical Block
Loading the interactive model…
Interactive 3D model of Stepped Slot Mechanical Block

Fittings and adapters

Stepped Slot Mechanical Block

1 views
Bounding box
80 × 42 × 48 mm
Engine
3D Printing B-rep
Parameters
11
Published
November 21, 2026

Download

Free to download and use. See the terms.

The prompt

Create a symmetric 3D mechanical part in millimeters (mm) with the origin at the center of the bottom plane (Z = 0). 1. Base Body (Extrusion): - Create a bottom rectangular base along the X-axis: length 80 mm (from X = -40 to +40), width 42 mm along the Y-axis (from Y = -21 to +21), height 16 mm along the Z-axis (from Z = 0 to Z = 16). - On top of the base, create a central rectangular block: length 50 mm along the X-axis (from X = -25 to +25), full width 42 mm along the Y-axis (from Y = -21 to +21), extending up to total height Z = 48 mm. 2. Longitudinal Stepped Through-Slot (Cutout): - Cut a through-slot along the entire length of the part (along the X-axis) centered at Y = 0 with a constant width of 24 mm (from Y = -12 to +12): - Across the full 80 mm length, cut from the bottom Z = 0 up to Z = 8 mm (leaving 8 mm thick side flanges on the left and right ends). - Within the central 50 mm block (from X = -25 to +25), extend this slot cut higher from Z = 0 up to Z = 36 mm (20 mm above the base flanges). 3. Cylindrical Through-Holes (Cutouts): - Horizontal through-hole: diameter 30 mm (radius 15 mm), axis parallel to the Y-axis, centered at X = 0 and Z = 26 mm (22 mm below the top face Z = 48). Cut completely through the part along the Y-axis. - Vertical through-hole: diameter 14 mm (radius 7 mm), axis parallel to the Z-axis, centered at X = 0 and Y = 0. Cut downward from the top face (Z = 48) until it intersects the horizontal 30 mm hole.

Parameters

NameValueRange
Overall length along X80 mm40 – 200
Overall width along Y42 mm20 – 120
Base body height16 mm4 – 60
Central block length along X50 mm10 – 200
Total height of central block48 mm8 – 120
Longitudinal slot width24 mm4 – 100
Slot cut height across full length8 mm1 – 40
Slot cut height inside central block36 mm1 – 110
Horizontal through-hole diameter30 mm2 – 60
Horizontal hole axis height26 mm2 – 110
Vertical through-hole diameter14 mm2 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Stepped Slot Mechanical Block - Free CAD Model (STEP, STL) | TextoCAD