Jigs and fixtures
Stepped Axle Shaft Ø48/Ø45/Ø41.5 x 650
- Bounding box
- 650.0 × 48.0 × 48.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 2D engineering drawing of a long stepped cylindrical axle shaft according to GOST standard layouts, strictly shown from the front view (lengthwise horizontal layout). White background with clear black geometry lines. Total part length L = 650 mm. The shaft must be drawn as three coaxial cylinder sections connected in series along a single horizontal axis of symmetry: 1. Left end section: diameter 48 mm, length 75 mm. 2. Central section: smooth cylinder, diameter 45 mm, length 490 mm. 3. Right end section: overall length 85 mm. This section must be divided into three consecutive parts: a 35 mm part with 48 mm diameter, a middle 15 mm groove with a smaller diameter of 41.5 mm, and a final 35 mm part with 48 mm diameter. Include horizontal dimension lines indicating lengths 650 mm, 75 mm, 490 mm, 35 mm, 15 mm, 35 mm and vertical diametral dimension lines indicating Ø 45 mm, Ø 48 mm, and Ø 41.5 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Left End Diameter | 48 mm | 30 – 90 |
| Left End Length | 75 mm | 20 – 250 |
| Central Shaft Diameter | 45 mm | 20 – 90 |
| Central Shaft Length | 490 mm | 100 – 900 |
| Right End Shoulder Diameter | 48 mm | 30 – 90 |
| Right End First Shoulder Length | 35 mm | 5 – 120 |
| Groove Diameter | 41.5 mm | 15 – 85 |
| Groove Length | 15 mm | 2 – 80 |
| Right End Final Shoulder Length | 35 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs