Jigs and fixtures
Standing Desk Balance Board
- Bounding box
- 300 × 200 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
i want a balance board used in standing desks
Parameters
| Name | Value | Range |
|---|---|---|
| Deck length | 300 mm | 150 – 600 |
| Deck width | 200 mm | 100 – 400 |
| Deck thickness | 15 mm | 8 – 30 |
| Deck corner radius | 25 mm | 5 – 60 |
| Deck stand-off height | 45 mm | 20 – 90 |
| Rocker length | 220 mm | 100 – 400 |
| Rocker width | 110 mm | 60 – 300 |
| How far the rocker ends lift | 14 mm | 4 – 30 |
| Grip dimple diameter | 6 mm | 3 – 12 |
| Grip dimple depth | 1 mm | 0.6 – 3 |
| Grip dimple spacing | 18 mm | 8 – 40 |
| M4 clearance hole | 4.5 mm | 3 – 6 |
| Screw head diameter | 8 mm | 5 – 14 |
| Screw hole spacing | 140 mm | 60 – 260 |
| Alignment tongue length | 120 mm | 40 – 200 |
| Alignment tongue width | 60 mm | 30 – 150 |
| Alignment tongue depth | 1.2 mm | 0.8 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs