Jigs and fixtures
Standard Spur Gear M1.5 x 80T
- Bounding box
- 123.0 × 123.0 × 10.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
make teeth standard
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1.5 mm | 0.5 – 10 |
| Number of Teeth | 80 teeth | 8 – 200 |
| Bore Diameter | 110 mm | 0 – 115 |
| Face Width | 10 mm | 2 – 60 |
| Pressure Angle (standard 20) | 20 deg | 14.5 – 25 |
| Helix Angle (0 = straight spur) | 0 deg | -45 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs