Jigs and fixtures
Soil-Loosening & Cassava Uprooting Machine Assembly
- Bounding box
- 2770.0 × 1950.0 × 1394.1 mm
- Engine
- Precision B-rep
- Parameters
- 51
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
Using the attached reference image, create a **professional, fully editable 3D CAD assembly and dimensioned A3 engineering drawing** of a Soil-Loosening and Cassava Uprooting Machine for Small-Scale Farms in Wao, Lanao del Sur. Match the reference image’s isometric appearance, component arrangement, and drawing layout. Model realistic, separate mechanical parts—not simple lines—including the steel frame, two agricultural wheels, 6.5 HP gasoline engine, transmission, digging tines, blades, articulated lifting arms, gripping claws, pivots, and supports. **Overall dimensions:** 2,200 mm long × 1,500 mm wide × 1,100 mm high. Adjustable digging depth: 250–300 mm. Main frame: 50 × 50 × 3 mm square steel tube. Lifting arms: 40 × 40 × 3 mm square steel tube. Wheel diameter: 400 mm. Digging tines: 300 mm long × 10 mm thick. Create one large front-left isometric view, top view, right-side view, front view, rear view, three enlarged component details, numbered callouts, dimension lines in millimetres, parts list, specifications table, and engineering title block. Use professional mechanical drafting standards, accurate proportions, clean line weights, readable dimensions, and consistent geometry across all views. Ensure components are connected and mechanically plausible. **Deliverables:** editable 3D assembly, DXF for the 2D drawing, STEP for 3D geometry, and print-ready A3 PDF. If any dimension or mechanism is undefined, flag it rather than inventing engineering specifications. Prioritize dimensional accuracy, mechanical coherence, and editability over decoration.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Length | 2200 mm | 1500 – 3000 |
| Frame Width | 1500 mm | 1000 – 2000 |
| Frame Height | 400 mm | 200 – 800 |
| Frame Tube Size | 50 mm | 30 – 80 |
| Ground Clearance | 250 mm | 100 – 500 |
| Wheel Diameter | 400 mm | 250 – 600 |
| Wheel Width | 120 mm | 80 – 200 |
| Wheel Hub Diameter | 30 mm | 20 – 50 |
| Wheel Axle Rear Offset | 400 mm | 100 – 800 |
| Wheel Y Offset from Side | 60 mm | 0 – 150 |
| Engine Length | 400 mm | 250 – 600 |
| Engine Width | 350 mm | 200 – 500 |
| Engine Height | 350 mm | 200 – 500 |
| Engine X Position | 600 mm | -1000 – 1000 |
| Engine Y Position | 0 mm | -750 – 750 |
| Engine Z Offset (above frame) | 0 mm | 0 – 200 |
| Transmission Length | 500 mm | 300 – 800 |
| Transmission Width | 250 mm | 150 – 400 |
| Transmission Height | 250 mm | 150 – 400 |
| Transmission X Position | -100 mm | -1000 – 1000 |
| Transmission Y Position | 0 mm | -750 – 750 |
| Transmission Z Offset (above frame) | 0 mm | 0 – 200 |
| Tine Rotor Width | 1200 mm | 600 – 1800 |
| Tine Rotor Shaft Diameter | 50 mm | 30 – 80 |
| Number of Tines | 6 | 2 – 12 |
| Tine Length | 300 mm | 150 – 500 |
| Tine Thickness | 10 mm | 5 – 20 |
| Tine Width | 30 mm | 15 – 60 |
| Tine Rotor X Position | 0 mm | -1000 – 1000 |
| Tine Rotor Z Position | 100 mm | -200 – 500 |
| Blade Length | 300 mm | 150 – 500 |
| Blade Width | 100 mm | 50 – 150 |
| Blade Thickness | 10 mm | 5 – 20 |
| Arm Length | 700 mm | 400 – 1000 |
| Arm Tube Size | 40 mm | 25 – 60 |
| Arm Elevation Angle | 45 deg | 0 – 90 |
| Arm Pivot X Offset (from rear) | 50 mm | 0 – 200 |
| Arm Pivot Y Offset (from center) | 500 mm | 200 – 700 |
| Arm Pivot Z Offset (above frame top) | 0 mm | 0 – 200 |
| Claw Length | 250 mm | 150 – 400 |
| Claw Width | 150 mm | 80 – 250 |
| Claw Height | 80 mm | 40 – 150 |
| Pin Diameter | 25 mm | 10 – 50 |
| Pin Length | 100 mm | 50 – 200 |
| Depth Support Length | 500 mm | 300 – 800 |
| Depth Support Tube Size | 50 mm | 30 – 80 |
| Depth Support X Offset (from rear) | 100 mm | 0 – 300 |
| Depth Support Y Offset (from center) | 650 mm | 300 – 750 |
| Stabilizer Length | 500 mm | 300 – 800 |
| Stabilizer Tube Size | 50 mm | 30 – 80 |
| Stabilizer Z Center | 150 mm | 50 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs