Mechanical parts
SANS 164-1 Plug with Ejector Assembly
- Bounding box
- 44.0 × 44.0 × 71.1 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Start with a real SANS 164-1 plug (like the SABS plug you showed). Do not change the outside shape. Cut a 24 mm hole in the top centre. Insert the push button. Put the spring directly under the button. Put the ejector plunger in the centre between the three pins. Leave the rear cable exit exactly where it is on the original plug.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width | 44 mm | 30 – 60 |
| Body Height | 44 mm | 30 – 60 |
| Body Depth | 52 mm | 40 – 80 |
| Edge Fillet Radius | 2 mm | 0 – 4 |
| Cable Exit Hole Diameter | 10 mm | 6 – 15 |
| Cable Exit Hole Depth | 20 mm | 10 – 40 |
| Button Hole Diameter | 24 mm | 10 – 40 |
| Button Hole Depth | 20 mm | 10 – 35 |
| Earth Pin Diameter | 7.94 mm | 5 – 10 |
| Earth Pin Length | 19.05 mm | 10 – 30 |
| Earth Pin X Position | 0 mm | -15 – 15 |
| Earth Pin Y Offset from Centre | 12 mm | 5 – 20 |
| Line/Neutral Pin Diameter | 5.08 mm | 3 – 8 |
| Line/Neutral Pin Length | 14.29 mm | 8 – 25 |
| Line/Neutral Pin X Offset | 10 mm | 5 – 15 |
| Line/Neutral Pin Y Offset | -8 mm | -20 – 0 |
| Button Diameter | 24 mm | 10 – 40 |
| Button Body Height | 10 mm | 5 – 20 |
| Button Flange Diameter | 28 mm | — |
| Flange Height | 2 mm | 0.5 – 5 |
| Spring Outer Diameter | 20 mm | 10 – 30 |
| Spring Free Length | 15 mm | 10 – 30 |
| Spring Wire Diameter | 1.2 mm | 0.5 – 3 |
| Number of Coils | 6 | 3 – 10 |
| Plunger Diameter | 8 mm | 4 – 12 |
| Plunger Length | 40 mm | 20 – 60 |
| Plunger Channel Diameter | 8.2 mm | 8 – 12 |
| Plunger Channel Depth | 30 mm | 15 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con