Jigs and fixtures
Rounded Enclosure Tray 300x200x25
- Bounding box
- 300.0 × 200.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
make 3d model with Dimensions: Length =300 mm, width = 200 mm, and height = 25mm. Wall Thickness: Standard is 2mm for 3D printing. Edges with R20
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (X) | 300 mm | 50 – 600 |
| Overall Width (Y) | 200 mm | 50 – 600 |
| Overall Height (Z) | 25 mm | 5 – 200 |
| Wall / Floor Thickness | 2 mm | 0.8 – 12 |
| Corner Radius R | 20 mm | 0 – 80 |
| Bottom Edge Fillet | 1 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs