Jigs and fixtures
Rod and Pin Cutting Jig with Flat Filing Guide
- Bounding box
- 70.3 × 30.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Printed jig for cutting the six 3 mm output pins to 21 mm and the 8 mm output rod to 40.5 mm with a hacksaw, and for filing the 0.6 mm drive flat (5 mm long) on the end of the rod.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 8 mm | 6 – 10 |
| Rod cut length | 40.5 mm | 30 – 60 |
| Drive flat depth | 0.6 mm | 0.3 – 1.2 |
| Drive flat length from the rod end | 5 mm | 3 – 8 |
| Pin stock diameter | 3 mm | 2 – 4 |
| Pin cut length | 21 mm | 15 – 30 |
| Radial clearance around the stock in the bores | 0.15 mm | 0.05 – 0.3 |
| Saw slot width | 1.8 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs