Fittings and adapters
Rigid Flange Coupling with Hex Fasteners
- Bounding box
- 100.0 × 100.0 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
nut are outside the dram i want flaunge coupling
Parameters
| Name | Value | Range |
|---|---|---|
| Flange Outside Diameter | 100 mm | 80 – 120 |
| Flange Thickness | 10 mm | 5 – 20 |
| Hub Outside Diameter | 45 mm | 30 – 60 |
| Hub Projection | 25 mm | 10 – 50 |
| Central Bore Diameter | 20 mm | 10 – 40 |
| Bolt Circle Diameter (PCD) | 76 mm | 40 – 80 |
| Bolt Hole Diameter | 12 mm | 6 – 16 |
| Number of Bolts | 4 mm | 3 – 8 |
| Shaft Diameter | 20 mm | 10 – 30 |
| Shaft Length (each side) | 80 mm | 40 – 120 |
| Bolt Shank Diameter | 10 mm | 6 – 14 |
| Bolt Shank Length | 30 mm | 20 – 50 |
| Bolt Head Across Flats | 16 mm | 10 – 20 |
| Bolt Head Height | 6.4 mm | 4 – 10 |
| Nut Across Flats | 17 mm | 10 – 20 |
| Nut Thickness | 8 mm | 5 – 12 |
| Hub Fillet Radius | 1 mm | 0.5 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Shouldered Spacer 20/26 x 15
Create a mechanical shouldered spacer from scratch. Main body: 20 mm outer diameter and 12 mm height. Add a concentric flange at the bottom: 26 mm outer diameter and 3 mm thickness
Cylindrical D-Shaft Flange
Create a cylindrical flange with a base diameter of 40 mm and a total height of 15 mm. Feature an 8 mm central D-shaft bore through the entire height. On the bottom 4 mm thick flan
Radial Lip Seal 75×100
make a seal that has inner diameter equal of 75mm outer diameter of 100 mm and it should rest on the inner diameter of a flange like part
DN-100 Pipe Spool with Flanges
A steel tube with two DN-100 flanges in each end
Assembled Split Y-Pipe Joint with Bolted Flange
i want to join a couple of pypes in these pies are wires i need an y-pipe joint with 50mm inside but it needs to be an split design withan flange were v´can bolt togeter the hole