Jigs and fixtures
Reinforced 5 mm Two-Peg Closet Shelf Bracket
- Bounding box
- 117 × 33 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
For approximately 36-inch closet opening and 31-inch shelf, about 63.5 mm side gap each. Two standard 5 mm vertical pegs at assumed 32 mm pitch, 105 mm reaching support, reinforced triangular web. Prototype only, not load rated for over 40 lbs.
Parameters
| Name | Value | Range |
|---|---|---|
| Mounting peg diameter | 5 mm | 4.6 – 5.2 |
| Vertical peg center spacing | 32 mm | 24 – 64 |
| Peg insertion depth | 12 mm | 8 – 18 |
| Horizontal reach from closet wall | 105 mm | 80 – 130 |
| Front to back support width | 30 mm | 20 – 45 |
| Support slab thickness | 12 mm | 8 – 16 |
| Center reinforcing rib width | 12 mm | 8 – 18 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs