Jigs and fixtures
Reference-Style Complete Motorcycle Alloy Wheel Assemblies - Final
- Bounding box
- 1352.9 × 599.9 × 140.2 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Final reference-matched concept CAD: front and rear motorcycle wheel assemblies with block-pattern black tyres, black alloy rims, swept ten-spoke wheel cores, central axle hubs, and silver twin-track drilled brake rotors. Parts exported separately. Verify all actual bike fitment and safety dimensions before manufacture.
Parameters
| Name | Value | Range |
|---|---|---|
| 17-inch bead-seat diameter | 431.8 mm | 431 – 432.5 |
| Front tyre section width | 110 mm | 100 – 120 |
| Front tyre aspect ratio | 70 % | 60 – 80 |
| Rear tyre section width | 140 mm | 130 – 150 |
| Rear tyre aspect ratio | 60 % | 50 – 70 |
| Front rim width (concept) | 76.2 mm | 65 – 90 |
| Rear rim width (concept) | 88.9 mm | 75 – 105 |
| Front tread width | 76 mm | 60 – 90 |
| Rear tread width | 92 mm | 75 – 115 |
| Front crown thickness | 25 mm | 18 – 35 |
| Rear crown thickness | 27 mm | 20 – 38 |
| Tread block groove count | 32 count | 24 – 44 |
| Tread groove width | 5 mm | 3 – 7 |
| Tread groove depth | 4 mm | 2.5 – 6 |
| Alternating tread groove angle | 22 deg | 10 – 30 |
| Alloy spoke count | 10 count | 8 – 12 |
| Alloy spoke thickness | 8 mm | 5 – 12 |
| Hub outside diameter | 64 mm | 50 – 75 |
| Axle/bearing bore diameter | 20 mm | 15 – 25 |
| Front brake rotor diameter (concept) | 276 mm | 250 – 300 |
| Rear brake rotor diameter (concept) | 220 mm | 200 – 250 |
| Brake rotor thickness | 4.5 mm | 3.5 – 6 |
| Rotor perforation count per track | 24 count | 16 – 32 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs