Jigs and fixtures
Railway Track Alignment Energy Monitoring System - Concept Layout
- Bounding box
- 1016.8 × 190.0 × 80.0 mm
- Engine
- Precision B-rep
- Parameters
- 68
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
act as a graphical designer with the domain knowledge of mechanical & CAD & embedded and iot -create an conceptual sketch with all relevant dimension for Analysis of Impact of railway Track Alignment on Energy Consumption system with sepearte components
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 40 mm | 5 – 200 |
| Enclosure Length (X) | 200 mm | 120 – 320 |
| Enclosure Width (Y) | 150 mm | 80 – 250 |
| Enclosure Height (Z) | 80 mm | 40 – 150 |
| Wall Thickness | 3 mm | 1.5 – 8 |
| Cable Gland Diameter | 12 mm | 5 – 25 |
| Cable Gland Length | 10 mm | 3 – 25 |
| Mounting Flange Width | 20 mm | 8 – 40 |
| Mounting Flange Thickness | 5 mm | 2 – 10 |
| Flange Hole Diameter | 6 mm | 3 – 12 |
| MCU Board Length | 101.5 mm | 50 – 160 |
| MCU Board Width | 53.3 mm | 30 – 90 |
| MCU Board Thickness | 15 mm | 5 – 30 |
| USB Connector Length | 12 mm | 5 – 25 |
| USB Connector Width | 10 mm | 4 – 20 |
| USB Connector Height | 11 mm | 4 – 20 |
| Power Jack Length | 10 mm | 4 – 20 |
| Power Jack Width | 9 mm | 4 – 20 |
| Power Jack Height | 11 mm | 4 – 20 |
| GPS Module Length | 25 mm | 12 – 50 |
| GPS Module Width | 25 mm | 12 – 50 |
| GPS PCB Thickness | 5 mm | 1 – 12 |
| Ceramic Antenna Thickness | 4 mm | 1 – 12 |
| IMU Board Length | 20 mm | 10 – 45 |
| IMU Board Width | 15 mm | 8 – 40 |
| IMU PCB Thickness | 3 mm | 1 – 10 |
| IMU Chip Length | 4 mm | 1 – 12 |
| IMU Chip Width | 4 mm | 1 – 12 |
| IMU Chip Height | 1.5 mm | 0.5 – 6 |
| Energy Module Length | 50 mm | 25 – 90 |
| Energy Module Width | 30 mm | 15 – 60 |
| Energy Module Height | 20 mm | 8 – 45 |
| Terminal Block Length | 10 mm | 4 – 22 |
| Terminal Block Width | 18 mm | 6 – 40 |
| Terminal Block Height | 8 mm | 3 – 20 |
| Battery Pack Length | 150 mm | 80 – 260 |
| Battery Pack Width | 100 mm | 50 – 200 |
| Battery Pack Height | 50 mm | 20 – 120 |
| Protection Circuit Length | 35 mm | 10 – 80 |
| Protection Circuit Width | 25 mm | 8 – 60 |
| Protection Circuit Height | 10 mm | 3 – 30 |
| GSM Module Length | 25 mm | 12 – 50 |
| GSM Module Width | 23 mm | 10 – 50 |
| GSM PCB Thickness | 3 mm | 1 – 10 |
| Antenna Connector Diameter | 6 mm | 2 – 15 |
| Antenna Connector Height | 8 mm | 2 – 20 |
| Bracket Length | 250 mm | 120 – 400 |
| Bracket Width | 150 mm | 60 – 300 |
| Bracket Thickness | 5 mm | 2 – 12 |
| Mounting Hole Diameter | 8 mm | 3 – 16 |
| Hole Edge Inset | 15 mm | 6 – 60 |
| Sensor Housing Length | 100 mm | 40 – 200 |
| Sensor Housing Width | 50 mm | 20 – 120 |
| Sensor Housing Height | 30 mm | 12 – 80 |
| Optical Window Diameter | 12 mm | 4 – 30 |
| Optical Window Length | 8 mm | 2 – 25 |
| Logger Board Length | 50 mm | 20 – 100 |
| Logger Board Width | 30 mm | 12 – 70 |
| Logger PCB Thickness | 5 mm | 1 – 12 |
| MicroSD Slot Length | 8 mm | 2 – 20 |
| MicroSD Slot Width | 14 mm | 4 – 30 |
| MicroSD Slot Height | 3 mm | 1 – 8 |
| Display Length | 30 mm | 15 – 70 |
| Display Width | 30 mm | 15 – 70 |
| Display Thickness | 5 mm | 1 – 15 |
| Screen Window Length | 26 mm | 8 – 60 |
| Screen Window Width | 16 mm | 5 – 45 |
| Screen Recess Depth | 1.5 mm | 0.5 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs