Jigs and fixtures
Rail-Guided Silage Wagon with Hydraulic Scraper Floor
- Bounding box
- 3220.0 × 2016.1 × 567.5 mm
- Engine
- Precision B-rep
- Parameters
- 50
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
Erstelle eine professionelle 3D-CAD-Konstruktion eines schienengeführten Silagewagens mit hydraulischem Kratzboden. Maße: - Ladefläche innen: 3000 × 1850 mm - Gesamthöhe: ca. 1620 mm - Leergewicht: maximal 1000 kg - Nutzlast: Ziel 5000 kg - Seitenwände: Holzbohlen 50 × 200 mm, 7 Reihen - Stahlrahmen mit zusätzlichen Seitenstützen - Zuggabel: 700 mm, Kupplungshöhe 517,5 mm Fahrwerk: - 2 Achsen, 4 gelagerte Schienenräder - Raddurchmesser 220 mm - Achsdurchmesser 50 mm - I-Schienen 260 × 120 mm - Schienenabstand innen 1880 mm Kratzboden: - Zwei Förderketten mit Querleisten - Entladung nach hinten - Hydraulikmotor mit 200 bar, Vor- und Rücklauf - Motorgröße noch offen Erstelle: 1. Parametrisches 3D-Modell 2. Maßstäbliche technische Zeichnungen 3. Einzelteilzeichnungen und Stückliste 4. Berechnungen für Rahmen, Achsen, Kratzboden und Hebepunkte Verwende DIN-/ISO-Normen. Alle Bauteile sollen geometrisch zusammenpassen. Kennzeichne unbestätigte Tragfähigkeiten und Maße. Ziel ist eine fachlich prüfbare Werkstattkonstruktion.
Parameters
| Name | Value | Range |
|---|---|---|
| Load Length | 3000 mm | 1000 – 6000 |
| Load Width | 1850 mm | 800 – 3000 |
| Chassis Length | 3200 mm | 1000 – 6500 |
| Chassis Width | 1950 mm | 800 – 3200 |
| Floor Height Above Rail | 220 mm | 100 – 500 |
| I-Beam Width | 120 mm | 50 – 300 |
| I-Beam Height | 220 mm | 50 – 500 |
| Cross Member Width | 100 mm | 20 – 300 |
| Cross Member Height | 120 mm | 20 – 300 |
| Cross Member Count | 5 pcs | 2 – 12 |
| Plank Length | 3000 mm | 500 – 6000 |
| Plank Height | 200 mm | 50 – 500 |
| Plank Thickness | 50 mm | 10 – 100 |
| Plank Rows per Side | 7 pcs | 1 – 15 |
| Stake Cross-Section | 80 mm | 20 – 200 |
| Stake Height | 1500 mm | 500 – 3000 |
| Stakes per Side | 5 pcs | 2 – 12 |
| Headboard Height | 1400 mm | 500 – 2500 |
| Headboard Thickness | 50 mm | 10 – 150 |
| Scraper Slat Count | 12 pcs | 4 – 30 |
| Slat Width | 40 mm | 10 – 150 |
| Slat Height | 50 mm | 10 – 200 |
| Chain Width | 30 mm | 10 – 100 |
| Chain Height | 30 mm | 10 – 100 |
| Chain Spacing | 1200 mm | 200 – 1800 |
| Drive Shaft Diameter | 50 mm | 10 – 200 |
| Sprocket Diameter | 200 mm | 50 – 500 |
| Sprocket Thickness | 30 mm | 5 – 100 |
| Bearing Block Width | 120 mm | 20 – 300 |
| Bearing Block Depth | 80 mm | 20 – 300 |
| Bearing Block Height | 200 mm | 20 – 500 |
| Hydraulic Motor Diameter | 150 mm | 50 – 400 |
| Hydraulic Motor Length | 300 mm | 100 – 800 |
| Coupling Diameter | 60 mm | 20 – 200 |
| Coupling Length | 100 mm | 20 – 300 |
| Rail Wheel Diameter | 220 mm | 50 – 600 |
| Rail Wheel Width | 60 mm | 20 – 200 |
| Wheel Flange Diameter | 240 mm | 50 – 650 |
| Wheel Flange Thickness | 10 mm | 2 – 50 |
| Axle Diameter | 50 mm | 10 – 200 |
| Inside Wheel Gauge | 1880 mm | 500 – 3000 |
| Axle Spacing | 1600 mm | 500 – 5000 |
| Drawbar Length | 700 mm | 100 – 2000 |
| Drawbar Width | 100 mm | 20 – 300 |
| Drawbar Height | 80 mm | 20 – 200 |
| Coupling Height | 517.5 mm | 100 – 1200 |
| Discharge Opening Width | 1600 mm | 200 – 2000 |
| Discharge Opening Height | 500 mm | 100 – 1200 |
| Gate Plate Thickness | 20 mm | 2 – 100 |
| Rear Panel Thickness | 50 mm | 5 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs