Jigs and fixtures
Rack and Pinion Mechanism
- Bounding box
- 200.0 × 30.0 × 57.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
"Generate a 3D CAD model assembly of a functional spur rack and pinion mechanism with a 20-degree pressure angle and a module of 2 mm.Pinion Parameters:Number of teeth: 20Pitch diameter: 40 mmFace width: 15 mmCenter bore diameter: 8 mm with a standard keyway slot.Rack Parameters:Length: 200 mmTooth pitch: 6.283 mm ($\pi \times \text{module}$)Rack base height below pitch line: 15 mmFace width: 15 mmSet the pinion pitch circle tangentially mated to the rack's pitch line for exact meshing depth. Output as a clean manifold STEP/IGES assembly file with standard ISO spur tooth profile geometry."
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 0.5 – 5 |
| Pressure Angle | 20 degree | 10 – 30 |
| Pinion Teeth | 20 count | 10 – 60 |
| Pinion Face Width | 15 mm | 5 – 40 |
| Pinion Bore Diameter | 8 mm | 3 – 20 |
| Keyway Width | 3 mm | 1 – 8 |
| Keyway Depth | 1.4 mm | 0.5 – 4 |
| Rack Length | 200 mm | 50 – 400 |
| Rack Face Width | 15 mm | 5 – 40 |
| Rack Base Height Below Pitch Line | 15 mm | 5 – 50 |
| Rack Tooth Pitch | 6.28 mm | 5 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs