Jigs and fixtures
PS5 Slim Miniature Display Stand
- Bounding box
- 100.0 × 70.0 × 50.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D printable display stand for a miniature PlayStation 5 Slim replica (NOT the real PS5). The miniature PS5 dimensions are: - Height: 200 mm - Width: 130 mm - Thickness: 60 mm The stand must: - Hold the miniature PS5 vertically. - Have an oval base measuring 100 mm x 70 mm x 8 mm. - Have two side supports that grip the console by pressure. - Have an internal slot width of 61 mm. - Include four cylindrical locating pegs underneath the base (8 mm diameter, 2 mm height), matching the reference stand. - Use 3 mm wall thickness. - Have rounded edges. - Be optimized for FDM 3D printing in PLA. - Require no support material. - Be a single printable model. - Look similar to the official PS5 Slim display stand.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 100 mm | 80 – 150 |
| Base Width | 70 mm | 50 – 100 |
| Base Height | 8 mm | 4 – 15 |
| Peg Diameter | 8 mm | 5 – 12 |
| Peg Height | 2 mm | 1 – 4 |
| Slot Width | 61 mm | 59 – 70 |
| Wall Thickness | 3 mm | 2 – 5 |
| Arm Height | 40 mm | 20 – 60 |
| Arm Length | 60 mm | 30 – 100 |
| Top Grip Tightness (narrowing per side) | 0.5 mm | 0 – 2 |
| Fillet Radius | 1 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs