Jigs and fixtures
Parametric Phone Stand
- Bounding box
- 107.4 × 80.0 × 83.2 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Design a parametric phone stand with a base width of 80 mm, a back support at 70 degree from the base, a 12 mm wide*15mm deep slot, 3 mm fillets on all exposed edges, and 8mm wall thickness throughout
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 80 mm | 40 – 150 |
| Base Depth | 80 mm | 40 – 150 |
| Wall Thickness | 8 mm | 2 – 20 |
| Back Support Angle | 70 deg | 30 – 90 |
| Back Support Length | 80 mm | 30 – 150 |
| Slot Width | 12 mm | 5 – 30 |
| Slot Depth | 15 mm | 5 – 50 |
| Slot Vertical Depth | 8 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs