Jigs and fixtures
Packout DJI Drone Insert
- Bounding box
- 348.4 × 233.4 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Have the tray follow the contours of the items to be held instead of open sections they can bounce around in
Parameters
| Name | Value | Range |
|---|---|---|
| Packout interior length | 350 mm | 250 – 460 |
| Packout interior width | 235 mm | 160 – 360 |
| Clearance per side | 0.8 mm | 0.2 – 3 |
| Tray height | 70 mm | 30 – 120 |
| Outer wall thickness | 2.4 mm | 1.2 – 6 |
| Divider thickness | 2.4 mm | 1.2 – 6 |
| Floor thickness | 3 mm | 2 – 8 |
| Outer corner radius | 8 mm | 0 – 25 |
| Drone bay length X | 168 mm | 120 – 260 |
| Drone bay width Y | 125 mm | 70 – 200 |
| Number of battery slots | 3 mm | 1 – 5 |
| Battery slot depth Y | 50 mm | 30 – 120 |
| Raised battery floor height | 22 mm | 0 – 45 |
| Notch width | 40 mm | 20 – 80 |
| Notch depth | 26 mm | 10 – 50 |
| Gap around each item | 1.2 mm | 0.4 – 4 |
| Cradle wall flare per side | 7 deg | 0 – 20 |
| Drone folded length | 145 mm | 60 – 250 |
| Drone folded width | 82 mm | 40 – 200 |
| Drone corner radius | 26 mm | 0 – 60 |
| Drone cradle depth | 30 mm | 10 – 60 |
| Battery length | 44 mm | 15 – 110 |
| Battery width | 36 mm | 10 – 70 |
| Battery corner radius | 9 mm | 0 – 30 |
| Battery cradle depth | 22 mm | 6 – 45 |
| Remote length | 140 mm | 40 – 200 |
| Remote width | 72 mm | 30 – 160 |
| Remote corner radius | 28 mm | 0 – 70 |
| Remote cradle depth | 30 mm | 10 – 60 |
| Charger pocket length | 90 mm | 20 – 160 |
| Charger pocket width | 70 mm | 20 – 100 |
| Charger cradle depth | 18 mm | 6 – 45 |
| Cable well diameter | 45 mm | 15 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs