P/Wall Retaining Wall Section

General Information & Text Labels: Title Header: Drawing For Construction of P/Work under WSS Pringer Sub-header: Const. of P/Wall, L = 50 Mts Section View Title: X-Section 2. Foundation / Bed Layer Details: Base Layer Width: 1.20 m Base Layer Thickness: 100 mm (0.10 m) Material Annotation: C. Conc. 1:4:8 (100 mm thick) 3. Wall Geometry (Cross-Section): Wall Base Width: 1.0 m (centered on top of the 1.20 m base offset) Wall Top Width: 0.50 m Wall Vertical Height: 2.0 m Profile Shape: Trapezoidal wall with a vertical inner face (left) and a sloped outer face (right) Material Annotation: C. Conc. 1:2:4 with 20% Boulders 4. Ground Lines & Elevations: Natural Ground Level (NSL): Sloped ground line intersecting near the top-left of the wall and sloping down past the toe of the wall on the right. Highlighted with hatching indicating ground level. 5. CAD Drafting Instructions: Draw to scale in meters (1\text{ unit} = 1\text{ m}). Add linear dimensions for top width (0.50\text{ m}), wall base (1.0\text{ m}), foundation width (1.20\text{ m}), wall height (2.0\text{ m}), and foundation thickness (100\text{ mm}). Include standard hatching patterns for concrete in the wall body and foundation layer, and earth hatching along the NSL line.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.