Jigs and fixtures
Mixer Drive Assembly - Motor, VFD & Stand
- Bounding box
- 200.0 × 235.0 × 393.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Motor, vfd, stand...
Parameters
| Name | Value | Range |
|---|---|---|
| Impeller dia | 120 mm | 60 – 300 |
| Hub dia | 24 mm | 10 – 80 |
| Hub height | 30 mm | 10 – 80 |
| Impeller shaft dia | 12 mm | 6 – 40 |
| Impeller shaft length | 160 mm | 60 – 400 |
| Blade count | 6 pcs | 2 – 12 |
| Blade width | 25 mm | 8 – 80 |
| Blade thickness | 4 mm | 2 – 15 |
| Base plate length (X) | 200 mm | 80 – 400 |
| Base plate width (Y) | 200 mm | 80 – 400 |
| Base plate thickness | 10 mm | 4 – 30 |
| Column width (X) | 40 mm | 15 – 120 |
| Column thickness (Y) | 16 mm | 8 – 60 |
| Column clearance to impeller | 15 mm | 5 – 60 |
| Impeller lift above base | 25 mm | 5 – 120 |
| Top plate thickness | 8 mm | 4 – 25 |
| Motor body dia | 90 mm | 40 – 250 |
| Motor body length | 140 mm | 50 – 400 |
| Motor shaft dia | 14 mm | 6 – 50 |
| Coupling dia | 30 mm | 15 – 100 |
| Coupling length | 40 mm | 15 – 120 |
| Motor underside gap | 10 mm | 6 – 60 |
| VFD width (X) | 80 mm | 30 – 250 |
| VFD depth (Y) | 45 mm | 20 – 150 |
| VFD height (Z) | 110 mm | 40 – 300 |
| VFD mount height above base | 60 mm | 10 – 400 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
Tikka T3/T3x Bore Guide
can you create a design from this photo Create an editable 3D CAD model of the orange Tikka T3/T3x 6.5 Creedmoor rifle bore guide Overall length: 210 mm Main cylindrical body outs